Installing foot pedals on Computer is Very Easy See Below Step by Step Method of Installation.

Problem: USB intermittent input delay - Using USB - VEC Infinity Foot Pedal. Details: I am a medical transcriptionist. I use the foot pedal to play voice files the doctor sends to me. Here is the problem: Using Word for Mac 2011. I press the foot pedal and the file starts to play (no problem). I lift foot OFF pedal to catch up with typing (no.

3 Types of Female Plugs used in Transcription Foot Pedals

Install 9 Pin / Serial / Com Port

Locate the com-port socket at the back of your computer as Seen in Picture Also called DB9 or 9 Pin. Microsoft.word.for.mac.2016 newiso download ddl warez.

1. Plug the pedals in and restart the computer.

2. Open Express Scribe. Open Settings and on the Control tab enable 'Use Foot Pedal Playback control'.

3. Select the correct COM port - e.g. COM1 (Serial).

4. Click the Foot Pedal Control Setup Wizard button.

5. Follow the instructions on the screen. If a Foot Pedal Hardware Error message saying 'Unable to open COM port' is displayed, the COM port you selected in Step 5 is not the COM port that the foot pedal is connected to. Select a different COM port and run the Foot Pedal Control Setup Wizard again.The pedals should now be correctly installed.

Install15 Pin / Joystick / Game Port

Locate the game-port socket at the back of your computer as Seen in Picture Also called DB15 or 15 Pin. It is probably in the sound card .

1. Plug the pedals in and restart the computer.

2. Once the computer has restarted go to Start - Control Panel in Windows.

3. Open 'Game Controllers'.

4. Select Add -> 2 axis, 4-button.

5. Select 'test' and 'test your pedals'. Pressing a different pedal should cause a different number to light up.

6. Close the control panel and open Express Scribe.

7. Open Settings and on the Control tab and tick 'Use foot Pedal Playback control'.

8. Select 'game port 1' (if you only have one game port)

9. Click on the 'Foot Pedal Control Setup Wizard'.

10. Follow the instructions on the screen.

The pedals should now be correctly installed.

There is 2 types of USB foot Pedals comes for transcription purpose one is known as offline model and other is known ' Online Model'

Install USB Port Offline Model

1. Go to Start - Control Panel and select Gaming Options. On the Controllers tab click on Add and Enable Galy USB Joystick.2. Click OK and from the Controllers tab select Properties and choose the Test tab.
3. Press Play on the foot pedal, the display will light Buttons 1 & 2
4. Press Fast Forward on the foot pedal, the display will light Button 2.
5. Press Rewind on the foot pedal, the display will light Button 1
This is Off-line Model Configuration.

Install VEC Foot Pedals - Online Model

1. Go to Start - Control Panel and select Gaming Options. On the Controllers tab click on Add and Enable vec infinity.
2. Click OK and from the Controllers tab select Properties and choose the Test tab.
3. Press Play on the foot pedal, the display will light Buttons 1 & 2
4. Press Fast Forward on the foot pedal, the display will light Button 2.
5. Press Rewind on the foot pedal, the display will light Button 1
This is Off-line Model Configuration.